natus Xltek Trex HD User & Service Manual Download | Manualshive

Page: 6 / 68

background image

User & Service Manual

Xltek® Trex HD Amplifier

5

1. Introduction

The Xltek

®

Trex HD amplifier, with its leading-edge mechanical design, provides you with maximum

reliability and performance for clinical electroencephalographic (EEG) and polysomnographic (PSG)
recordings. It is designed to be used with Natus SleepWorks

™ or NeuroWorks

®

software to assist with

diagnosis.

The Trex HD is equipped with a Bluetooth module which communicates wirelessly with a Trex HD Video
Interface that communicates with a video camcorder.

The Trex HD offers these features:



Connects to

Natus

computer



24 referential AC inputs



4 differential AC inputs



4 non-isolated DC inputs for connection to patient-worn transducers



Internal memory for up to 96hr of EEG recording



Battery powered by two AA alkaline batteries



Optional power pack providing up to 72 hours of continuous recording when used with two AA
alkaline batteries



Bluetooth module for wireless synchronization with HD video



Isolated serial port



Patient-event switch interface

WARNING:

We strongly recommend that you read the

Warnings and Cautions

section of

this manual before operating this amplifier.

1.1. Intended Use

The Trex HD is intended to be used as an electroencephalograph: to acquire, digitize, store and archive
electroencephalographic signals.

The Trex HD is intended to be used by either trained medical professionals or someone instructed by a
trained medical professional. It is designed for use in clinical environments such as hospital rooms,
epilepsy monitoring units, intensive care units, and operating rooms. It can be used with patients of all
ages, but is not designed for fetal use.

The sale, distribution, or use of this device is restricted to, by, or on order of a physician.

The Trex HD is supplied with a standard label displaying markings for EEG studies. For convenience,
when performing Sleep studies, the user may apply the “Trex HD Sleep” label with markings designed for
Sleep studies (provided). See “

Section

8 - Unpacking

” for pictures of the labels.

NOTE:

The functionality of the Trex HD is not affected by the label and all instructions,

warnings and cautions described in this manual still apply.

WARNING:

The Trex HD should NOT be used as an apnea monitor.

«
...
4
5
6
7
8
...
»

Summary of Contents for Xltek Trex HD





































































Reviews:

No comments

Related manuals for Xltek Trex HD

Brand: NAD Pages: 2

Brand: D.A.S. Pages: 28

Brand: d&b audiotechnik Pages: 28

Brand: Velleman Pages: 28

Brand: Coda Pages: 15

Reference 750 SE

Brand: Audio Research Pages: 18

Brand: Luxman Pages: 16

IronHeart IRT120H

Brand: Laney Pages: 20

JBL PARTYBOX710

Brand: Harman Pages: 26

Brand: Kramer Pages: 13

3W Amplified Phone Neckloop

Brand: Spy Earpice Pages: 3

Brand: Harley Benton Pages: 2

Thunder TA Super TA7801

Brand: MTX Pages: 6

Brand: GAS Pages: 12

Brand: TDT Pages: 8

Brand: HAMTRONICS Pages: 3

Brand: Extron electronics Pages: 2

Brand: Chiayo Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands