User & Service Manual
XLTEK Trex HD Amplifier
35
9.2.2.
Lanyard Setup
To use the lanyard setup:
1. Attach the lanyard to the two (2) rings on the back of the pouch.
2. After attaching the electrodes to the patient, place the Trex HD into the pouch with the electrode wires
exiting at the top or on the sides, as required.
3. Close the zippers as much as possible so that the Trex HD is secured in the pouch.
4. Once the Trex HD is enclosed in the pouch, p
lace the lanyard around the patient’s neck or shoulder,
or hang it on the bedside post.
5. Insert the patient event button into the holder on the side of the pouch and the gather the electrodes
into a ponytail.
Note:
If a power pack is being used, enclose it in the Trex HD pouch with the Trex HD in
Step 2.
9.3. Setting up Trex HD Amplifier for a non-Video Study
