User & Service Manual
Xltek® Trex HD Amplifier
19
Connecting other medical equipment, such as an electrical stimulator, simultaneously to the
same patient may constitute a safety hazard.
Do
NOT
touch any Trex HD system accessible metal parts and the patient simultaneously.
If a computer is located in the patient environment, it must be 60601-1 approved or 60950-1
approved and powered by a 60601-1 approved isolation transformer.
Do not use the Trex HD system in the vicinity of MRI or CT systems.
Do not allow loose electrodes to contact metal parts.
As with all medical equipment, carefully route patient cabling to reduce the possibility of patient
entanglement or strangulation.
User is not to position ME equipment in such a way as to make it difficult to operate the
disconnection device.
Potential allergic reactions could occur. Consult clinician on any allergies before use.
Do not use the Trex HD system when outside its carrying case as the device is not IPX
certified when used outside of the case.
No parts of the ME equipment shall be serviced or maintained while in use with a patient.
3.5. Pulse Oximeter Warnings
The Nonin XPOD pulse oximeter is to be operated by qualified personnel only. This manual,
the instructions for use for any pulse oximeter sensor or cable extender, the accessory
directions for use, all precautionary information, and specifications should be read prior to
use.
EXPLOSION HAZARD:
Do not use the pulse oximeter in the presence of flammable
anesthetics or other flammable substance in combination with air, oxygen-enriched
environments, or nitrous oxide.
A pulse oximeter should
NOT
be used as an apnea monitor.
