natus Xltek Trex HD User & Service Manual Download

Page: 33 / 68

Xltek® Trex HD Amplifier

User & Service Manual

8.2. Optional Accessories

The Trex HD Video Ambulatory Desktop System includes (Trex HD only, not available in all markets):



Trex HD package



HD Camcorder kit (camcorder, carrying case, tripod, clamp)



Trex HD Video Interface kit (Trex HD Video Interface, LANC cable (7.0 in / 0.18 m))



Acquisition desktop and monitor



Software license

The Trex HD Video Ambulatory Laptop System includes (Trex HD only, not available in all markets):



Trex HD package



HD Camcorder kit (camcorder, carrying case, tripod, clamp)



Trex HD Video Interface kit (Trex HD Video Interface, LANC cable (7.0 in / 0.18 m))



Acquisition laptop



Software license

Other optional accessories (Trex HD):



XLTEK trolley with optional video



Power pack for up to 72 hours of continuous recording



Sleep accessory kit



EEG accessory kit



Patient event switch (2.4 m / 7.9 ft)



SD flash card for camcorder



Nonin Xpod® Oximeter



Natus Photic Stimulator Trex HD Cable for Natus Photic Stimulator (2.4 m / 7.9 ft)

NOTE:

The Trex HD amplifier should only be used with cables, transducers, electrodes,

sensor, and switches that are supplied or approved by

Natus

Summary of Contents for Xltek Trex HD





































































Search results

Summary of Contents for Xltek Trex HD

Reviews:

Related manuals for Xltek Trex HD

Brands by name

Popular brands

natus Xltek Trex HD, User & Service Manual

Search results

Summary of Contents for Xltek Trex HD

Reviews:

Related manuals for Xltek Trex HD

Brands by name

Popular brands