natus Olympic Warmette 48, Instruction Manual, Page: 17 / 50

Olympic Warmette Models 48/49 and 55/56 Instruction Manual 2-3
Inspecting the Heater
Figure 2.3 Model 55/56 anchor holes
Figure 2.4 Model 55/56 anchor hole placement
Inspecting the Heater
If a Warmette fails to heat, a heater might have loosened during shipping. The
Warmette has three 500W heaters per Plenum Assembly.
Required Items:
„
Heater (part no. 401572)
„
1/4-in. nut driver
To check the heater:
1
Press the power switch to the
OFF
(O) position, and unplug the power cord.
2
Remove the uper white door seal, and then loosen — but do not remove — the
screws inside the door, behind the door stop (see Figure 2.5).
Leveling feet
Anchor holes
9.92 in.
17.5 in.
1.45 in.
6 in.
6 in.
Center
line
25.97 in.