natus Olympic Warmette 48, Instruction Manual, Page: 15 / 50

Olympic Warmette Models 48/49 and 55/56 Instruction Manual 2-1
S e c t i o n
2
Installation
This section describes how to install the Olympic Warmette Models 48/49
and 55/56.
Assembling the Warmette
When you first receive your Warmette from the factory, minimal assembly
is required.
Required Items:
„
Level
„
Soap-and-water or liquid disinfectant
„
Towel
To assemble the Warmette:
1
After uncrating, install the leveling feet and stand the Warmette upright.
2
Unpack the bottom tray(s) and put in place in the warming cabinet (see
Figure 1.1 on page 1-3).
3
Clean all metal surfaces with a towel moistened with soap-and-water or liquid
disinfectant. Plexiglas
®
doors must be cleaned with soap and water.
CAUTION
„
Read and be familiar with this manual before installing, operating, or servicing this
device. To ensure operator, technician, and patient safety, use only as specified in
this manual.
„
Only qualified technicians should assemble and install this product.
NOTE
#
The Warmette Models 48 and 55 have clear doors on the front (see Figure 1.1 on page 1-3).
The Models 49 and 56 have an additional set of doors on the back side. The Models 48/49
and 55/56 are assembled in the same manner.
CAUTION
The bottom tray(s) must be in place for the Warmette to operate properly.
NOTE
#
Never use alcohol to clean the doors as alcohol will damage the Plexiglas
®
.