natus Olympic Warmette 48, Instruction Manual, Page: 31 / 50

Olympic Warmette Models 48/49 and 55/56 Instruction Manual 6-1
S e c t i o n
6
Service
This section includes procedures for servicing the Olympic Warmette
Models 48/49 and 55/56.
Servicing the Warmette
If your Warmette should become damaged, replacement parts are available. To
order a part, see
Ordering Information on page 7-1.
Repair Policy
Do not use malfunctioning equipment. To promote product reliability, a qualified
technician should perform the replacement and service procedures described in this
section. Before servicing your equipment, check your equipment warranty status,
check the normal repair procedures for your facility, and determine the appropriate
repair procedure to perform.
To ensure performance to factory specifications, Natus Medical recommends that
all replacement parts be those either manufactured or sold by Natus Medical. After
all repair actions and tests are complete, perform the pre-operative test procedure in
this manual (see
on page 2-5) to ensure proper operation and compliance with
published specifications.
CAUTION
Only qualified technicians should perform the service procedures.
WARNING
Electrical shock hazard when the enclosure is open. Unplug the power cord from the
electrical outlet before servicing the Warmette.
NOTE
#
„
In this section, the illustrations depict either the Model 48/49 or the Model 55/56.
Follow the appropriate instructions when servicing your Model 48, 49, 55, or 56.
„
The Warmette Models 48 and 55 have clear doors on the front (see Figure 1.1 on
page 1-3). The Models 49 and 56 have an additional set of doors on the back side. The
Models 48/49 and 55/56 are serviced in the same manner unless otherwise noted.