2 Unpacking and installation
10
Madsen Zodiac
1.5
Navigating this manual
Menus, icons and functions to select are shown in bold type, as for instance in:
•
Click the
Set options
icon on the toolbar or select
Tools
>
Options
2
Unpacking and installation
To install and get started with Madsen Zodiac and the Otosuite Immittance module, follow the sequence below:
•
Unpack Madsen Zodiac (see
Unpacking 10
).
•
Install Otosuite on the PC. See the Otosuite Installation Manual on the Otosuite Installation disk.
•
Install Madsen Zodiac (see
Installing Zodiac 10
).
•
Run the Otosuite Configuration Wizard to connect to and set up communication with Madsen Zodiac. (See
Configuring the Immittance module 13
).
2.1
Unpacking
1.
Unpack the device carefully.
When you unpack the device and accessories, retain the packing material. If you need to send the device in for service,
the original packing material will protect against damage during transport.
2.
Visually inspect the equipment for possible damage.
If the device is damaged, do not use it. Contact the Natus representative for assistance.
3.
Verify the contents. If the package is incomplete, contact the Natus representative.
2.2
Storing
If you need to store Madsen Zodiac before use:
•
Store Madsen Zodiac and accessories in the boxes provided to protect the equipment from damage.
•
Store Madsen Zodiac and accessories in a dry environment.
2.3
Installing Zodiac
To ensure safe performance of the device, follow the Warning notes for installation.
See
Warning notes 123
.
Location
Perform immittance testing in a quiet room. A sound cabin or sound treated room is not necessary.
Warning
•
Do not store the device at temperatures below -20°C (-4°F) or above +60°C (95°F).
Do not operate the device at temperatures below +15°C (+59°F) or above +35°C (95°F).
Warning
•
Do not store the device at temperatures below -20°C (-4°F) or above +60°C (95°F).
Do not operate the device at temperatures below +15°C (+59°F) or above +35°C (95°F).
