TBX-1328 Installation Guide
2
ni.com
SCXI module input channels. With the SCXI-1121, four pairs of screw
terminals connect signals to the four SCXI module input channels and four
pairs connect to the SCXI module excitation channels. There are eight
resistor sockets, R<0..7>, for use with the 4 to 20 mA current input.
Conventions
The following conventions are used in this guide:
<>
Angle brackets that contain numbers separated by an ellipsis represent
a range of values associated with a bit or signal name—for example,
DIO<3..0>.
»
The
»
symbol leads you through nested menu items and dialog box options
to a final action. The sequence
File»Page Setup»Options
directs you to
pull down the
File
menu, select the
Page Setup
item, and select
Options
from the last dialog box.
This icon denotes a note, which alerts you to important information.
bold
Bold text denotes items that you must select or click on in the software,
such as menu items and dialog box options. Bold text also denotes
parameter names.
italic
Italic text denotes variables, emphasis, a cross reference, or an introduction
to a key concept. This font also denotes text that is a placeholder for a word
or value that you must supply.
monospace
Text in this font denotes text or characters that you should enter from the
keyboard, sections of code, programming examples, and syntax examples.
This font is also used for the proper names of disk drives, paths, directories,
programs, subprograms, subroutines, device names, functions, operations,
variables, filenames and extensions, and code excerpts.
monospace italic
Italic text in this font denotes text that is a placeholder for a word or value
that you must supply.
What You Need to Get Started
To set up and use the TBX-1328, you need the following items:
❑
TBX-1328 high-accuracy isothermal terminal block
❑
TBX-1328 High-Accuracy Isothermal Terminal Block Installation
Guide
❑
Read Me First: Safety and Radio-Frequency Interference