©
National Instruments Corporation
5
TBX-1328 Installation Guide
Installing the Terminal Block and Cable Assembly
After completing the
Connecting the Signals
section, you can install the
terminal block. Complete the following steps to mount the SH32-32-A
cable assembly and connect the TBX-1328 to the SCXI module while
referring to Figures 2 through 4 as needed.
1.
Power off the SCXI chassis.
2.
Power off the computer that contains the E Series data acquisition
(DAQ) device or disconnect the device from the SCXI chassis.
3.
Connect the TBX cable adapter to the appropriate SCXI module and
secure it by tightening both thumb screws.
Figure 2.
Connecting the SH32-32-A Cable to the SCXI Module
1
M 2.5 Mounting Screws
2
Cable Assembly
3
Thumb Screws
4
SCXI Chassis
5
TBX Cable Adapter
3
2
4
3
5
1
5
4
3
2
1
ADDRESS