background image

A-14

|

ni.com

Appendix A

Specifications

Maximum altitude

2,000 m (800 mbar) at a 25 °C ambient 
temperature

Pollution Degree

2

Indoor use only.

Operating Environment

Operating temperature, local

1

0 to 55 °C

Operating humidity

10 to 90%, noncondensing 

System air flow

0.4 m/s (80 LFM)

Storage Environment

Ambient temperature range

-20 to 70 °C

Relative humidity range

5 to 95%, noncondensing 

Safety, Environmental, and Regulatory Information

Read this section before you install, configure, operate, or maintain this product. Users are 
required to familiarize themselves with installation and wiring instructions in addition to 
requirements of all applicable codes, laws, and standards. Visit ni.com/manuals for more 
information about your product, including specifications, pinouts, and instructions for 
connecting, installing, and configuring your system.

Icons

Refer to the following descriptions if one of these icons is marked on your product or used in 
this guide.

Notice

Take precautions to avoid data loss, loss of signal integrity, degradation of 

performance, or damage to the product.

Caution

Take precautions to avoid injury. Consult the product documentation for 

cautionary statements when you see this icon printed on the product. Cautionary 
statements are localized into French for compliance with Canadian requirements.

1   

For PCI Express adapter cards with integrated air movers, NI defines the local operational ambient 
environment to be at the fan inlet. For cards without integrated air movers, NI defines the local operational 
ambient environment to be 25 mm (1 in.) upstream of the leading edge of the card. For more information 
about the local operational ambient environment definition for PCI Express adapter cards, visit 

ni.com/info

 and enter the Info Code 

pcielocalambient

.

Summary of Contents for PCI-8361

































































































































Reviews: