background image

A-36

|

ni.com

Appendix A

Specifications

MIL-PRF-28800F Class 2 high temperature 
limit.)

Operating relative humidity

10 to 90%, noncondensing 
(Tested in accordance with IEC 60068-2-56.)

Storage Environment

Ambient temperature range

-40 to 71 °C 
(Tested in accordance with IEC 60068-2-1 and 
IEC 60068-2-2. Meets MIL-PRF-28800F 
Class 3 limits.)

Relative humidity range

5 to 95%, noncondensing 
(Tested in accordance with IEC 60068-2-56)

Shock and Vibration

Operational shock

30 g peak, half-sine, 11 ms pulse 
(Tested in accordance with IEC 60068-2-27. 
Meets MIL-PRF-28800F Class 2 limits.)

Random Vibration

Operating

5 to 500 Hz, 0.3 g

rms

Nonoperating

5 to 500 Hz, 2.4 g

rms

(Tested in accordance with IEC 60068-2-64. 
Nonoperating test profile exceeds the 
requirements of MIL-PRF-28800F, Class 3.)

Caution

Clean the PXIe-8364 with a soft nonmetallic brush. Make sure that the 

device is completely dry and free from contaminants before returning it to service. 

Note

For full EMC compliance, operate this device with shielded cabling. In 

addition, all covers and filler panels must be installed. To obtain the DoC for this 
product, visit 

ni.com/certification

, search by model number or product line, 

and click the appropriate link in the Certification column.

Summary of Contents for PCI-8361

































































































































Reviews: