National Datacomm InstantWave NWH650, User Manual

Page: 36 / 61

30 InstantWave
High Rate 11Mbps Access Point
From the Filter card, some, all, or none of the protocols listed may be selected for
filtering out:
•
IP protocol
•
IPX protocol
•
NetBEUI protocol
•
AppleTalk protocol
•
Other protocols
•
Internet Multicast Frames
Selecting a protocol to be filtered will activate the AP’s protocol filtering
immediately on clicking
OK . Clicking Reset AP is not required. If, after filtering a
protocol, your network is not functioning as before, it’s likely the protocol is
required on the network and you should disable the filter for that protocol.
TFTP:
The Access Point supports remote firmware upgrades using TFTP (Trivial File
Transfer Protocol). You may customize TFTP services with the following options:
Figure 28. AP Setting/TFTP