10
InstantWave
High Rate
11Mbps
Access Point
Hardware Pre-Configuration
Before adding an AP into an existing Ethernet network, you may need to set basic
configurations, e.g. domain name (SSID), security setting (WEP), AP name,
channel number, or IP address in order to make it compatible with the existing
network.
Follow the steps below to connect the AP to a PC for configuration:
step1.
Connect the supplied RS-232 cable to the COM port on the AP and
connect the other end to a serial port (COM port) on the PC
step2.
Power on the AP
Installing the AP Management Tools
step1.
Insert the InstantWave High Rate CD into the CD-ROM drive and click
Start/Run
. Type
e:/menu.exe
(assuming the CD drive is E) and click
OK
to open the InstantWave CD main menu
step2.
Click
Install AP Management Tools
to install the
AP COMFig Tool
,
AP Management System (APMS)
and
Trap Server
utility to your system
