22
InstantWave
High Rate
11Mbps
Access Point
Figure 16. Hardware Diagnosis
Click
Start
and the tests will commence. As each item is tested, a yellow arrow
will appear alongside it. If the test is successful, the arrow will change to a green
tick. If a failure occurs, an “X” will appear. You can click
Cancel
at any time to
stop the tests. When the tests have completed, the
Cancel
button changes to a
Close
button. Click
Close
to return to the
Service
card.
Upgrade AP Firmware
From time to time updated firmware is released and may be downloaded from our
website at
http://www.ndc.com.tw/support/support.htm
The updated firmware may be installed via a COM port using the AP COMFig tool.
Click on
Upgrade AP Firmware
(Figure 9, page 12). The
Upgrade AP Firmware
dialog box will open (
Figure 17
).
