38
InstantWave
High Rate
11Mbps
Access Point
Figure 34. AP Trap Server Program
When the AP is powered on, or an Ethernet port becomes active, an event log will
be generated indicating the time, the MAC ID of the reporting AP, and the activity.
You may save, open, and delete log files from the
File
menu.
In the
Program
menu, select
Auto Startup After Reboot
to activate the Trap Server
when the system is rebooted, or
Pause Program
to pause the Trap Server.
Load Factory Configuration
Clicking
Load Factory Configuration
opens a dialog box. Click
OK
to
return the AP to the default settings. The default IP setting is
192.168.1.1
and the default subnet mask is
255.255.255.0
. Click the
Reset AP
menu
item to make the changes effective.
Upgrade AP Firmware
The Access Point’s (AP’s) embedded software is burned into the flash ROM.
However, an updated AP code can be installed over your LAN via the APMS
program. Click on
Upgrade AP Firmware
. The
Upgrade AP Firmware
dialog
box will open (
Figure 35
).
Use the
Browse
button to choose the file to be uploaded to the AP, or type the file
name and path in the
Local File
field.
