NGSLR Operations Manual
Most Common Errors and Their Resolutions
Document Number:
P a g e |
6 3
NASA NGSLR OPS Manual (v1.0)
The DAM computer will go through several file system checks, which may prove to be a lengthy process. Log
into DAM using the DAM/POP terminal. You should see a
at the bottom left of the screen indicating that you
are on DAM. If not, press ALT F3 to go to the DAM computer.
1. Log in and start met_archive by typing in:
start_met <ENTER>
, then
exit <ENTER>
2. Follow normal procedures from this point.
8.7.5 Remounting the disk drives on POP and DAM
If both POP and DAM are rebooted you should re mount the disk drives on both of these machines.
1. On POP, after logging in as operator type:
/mount_DANdirs<ENTER>
The response will be either the mounting of the disks or error messages saying the
resource is busy. Regardless of the
message, the result will ensure the mounting of the disks.
2. On the DAM/POP console switch to screen 3 (Alt F4)
3. Log in as operator
4. Type:
/mount_popdirs <ENTER>
8.7.6 How to do a soft reboot on RAT
1. On the RAT laptop, exit out of the RAT software by selecting
FILE
EXIT
.
2. Under the SYSTEM menu at the top left of the laptop screen, select
SHUTDOWN
.
3. When the pop up menu gives you a selection of what to do, select
RESTART
.
4. Follow the startup instructions included in Section 2 of this document.
8.7.7 How to do a hard reboot on RAT
1. Press and hold the power button on the RAT laptop until the system reboots
2. Follow the normal login and startup procedures for RAT
Note:
These the drives should be mounted on both POP and DAM before starting prior to starting MET_ARCHIVE.
8.7.8 How to do a soft reboot on the Camera Computer
To reboot the computer, close all open programs and windows, click the START button in the lower left corner of
the screen, and select
Shut Down
(Figure 8 16).
Figure 8 16: Start and Shut Down buttons
