NARGESA MP1400 CNC, Instruction Booklet

Page: 43 / 77

INSTRUCTIONS BOOK FOR PRESS BRAKE MP1400 CNC 42
7. MANUAL MODE FOR THE PRESS BRAKE.
Having chosen this option, the display information changes and offers full manual control of PRESS BRA-
KE MP1400 CNC.
In response to what appears on the LCD graphic display, you can choose to determine various parameters
before proceeding to work with that machine itself. However, it should be noted that each of the selected
options (>>>) in the bottom of the screen under the tab that appears, the peculiarities that are displayed
determine, define and affect the current option or parameter. With this, the aim is to facilitate as far as pos-
sible with regard to the selected option. We can make use of to choose the desired option. First,
focus on the first option.
7.1. Descending speed
Opting for this parameter allows you to set various rates of descent for the machine. If you look at the infor-
mation displayed within the tab displayed at the bottom of the screen, you will see how it is possible to set
two different speeds. To select one or the other, you only have to press the number that each one is is as-
signed. In this very simple way is how you ought to proceed if you want to modify this parameter.
>>>
MODE MANUAL PRESS BRAKE
Gauge Distance = 600.0 mm
Descent Speed = Low Speed
Upper Limit = 12000
Lower Limit = 12000
Performing in Manual
INFORMATION
Enter a new gauge distance
and press Confirm
Gauge =
>>>
MODE MANUAL PRESS BRAKE
Gauge Distance = 600.0 mm
Descent Speed = Low Speed
Upper Limit = 12000
Lower Limit = 12000
Performing in Manual
INFORMATION
Select the descent speed
1.- Low Speed
2.- High Speed