NARGESA MP1400 CNC, Instruction Booklet

Page: 46 / 77

INSTRUCTIONS BOOK FOR PRESS BRAKE MP1400 CNC 45
Now that you know the only difference between the two modes, all you have to do is follow the information
detailed in the tab at the bottom of the graphic LCD display, and choose one or the other mode of operation
for the Press Brake.
7.6. Operating with the machine
Once you have set all the necessary parameters on the screen to work with the machine, you can proceed
to operate with it.
Keep in mind at all times that if you have chosen the automatic mode, whenever you release the pedal
down, the ram automatically rise up to the upper limit. So if you need to do some folding tests first to adjust
the final shape of the sheet to be folded first, we recommend first to work in manual mode, as it will be
easier to make that adjustment.
>>>
MODE MANUAL PRESS BRAKE
Gauge Distance = 600.0 mm
Descent Speed = Low Speed
Upper Limit = 12000
Lower Limit = 12000
Performing in Manual
INFORMATION
Select the performance mode:
1.- Manual Mode
2.- Automatic mode