NARGESA MC650, Instruction Book, Page: 8 / 82

- 7 -
2. TRANSPORT AND STORAGE
2.1. Transport
There are two ways of carrying out the transportation of the machine:
- From the bottom, through the base of the machine, using a pallet jack or forklift as shown in the illustra-
tion. Never raise the machine more than 200 mm from the surface in order to prevent the risk of tipping
- From the top of the machine, from the anchor point designed for this purpose defined in figure 4, using a
crane or forklift .
Figure 4. Transportation of the machine
2.2. Storage Conditions
The bending machine shouldn ’ t be stored in a place that does not meet the following requirements:
- Humidity between 30% and 95%
- Temperature of - 25 °C to 55 °C or 75 °C for periods not exceeding 24hrs
(remember that these temperatures are in storage conditions)
- Machines or heavy objects should not be stacked on top
Anchoir point for lifting