NARGESA MC650, Instruction Book, Page: 28 / 82

- 27 -
Now, with the material secured in the machine, it can be placed in position to begin bending by making the
rollers rotate towards the left or right as learned in the section on the manual operating mode.
Once the profile or pipe to be processed is in the required position, choose which of the two rollers (X or Y)
you want to move to begin making the desired bend. Press the movement button with one hand and the
direction joystick with the other to move the chosen roller up or down to create the beginning of the bend
radius. As soon as you are satisfied with the position reached (remember the current height is shown on
screen at all times), you can save the step as you did before. Accept the confirmation message and it will
be ready to create your first bend radius.
Having reached this point, turn the rollers to the right or left as desired to create the bend in one direction
or another. Firmly secured in the machine and with the beginning of the bend radius already created, the
profile or pipe to be processed will begin to be bent following the radius generated based on the geometry
defined by the three pull rollers.
If you are satisfied with the resulting piece, you can move on to production. If you are not, adjust the X and
Y rollers again to get a larger or smaller bend radius as required.