NARGESA MC650, Instruction Book, Page: 27 / 82

- 26 -
SECTION BENDING MACHINE MC650
By doing so, the application will create a second step for the program. This step is known as the “ clamping
step ” which is when the material loaded in the machine and ready for processing is firmly secured between
the upper roller and the two bottom rollers.
As a result, rollers X and Y must be moved to define a good loading step so the profile or pipe to be worked
is secured with the three rollers without deforming it.
Once that has been done, save the current step as you learned how to do for the previous step. Accept the
confirmation message and continue.
You must be aware that any program created with our MC650 bending machine absolutely requires these
two steps before bending can begin. The reason is to provide you, as the user, with a comfortable and safe
operating mode all while guaranteeing the result obtained for all pieces of the same type of profile or pipe
will be excellent for exceptional repeatability throughout the entire series.