NARGESA MC650, Instruction Book, Page: 35 / 82

- 34 -
SECTION BENDING MACHINE MC650
5.3.7. Importing and Exporting Data
The same software that runs on the physical machine can be run on a PC with a Windows operating sys-
tem. This makes it possible to get the operators and technicians who will intervene in the development and
production process familiar with the environment they will later use. However, remember that it
’ s simply a
simulation on a PC and some functions are not available unless done on the machine in question.
Having said this, it is possible to create materials or tools on the PC. However, since you won ’ t want to re-
plicate all that work again on the actual machine, you have the “ Importing and Exporting Data ” screen.
To access it, you must first press the icon at the bottom right - hand of the screen and then on the
icon in the menu that appears.
This screen allows you to export the data created on the PC and import them into the physical machine. Or
vice versa. In other words, data can be exported from the machine and imported to the PC for the desired
purpose if an operator has created new materials or tools on the machine.
If you pay attention to the middle of the screen, you ’ ll see how the data to be exported or imported is deci-
ded under the “ Filters ” section. Even though only transferring tools and materials has been mentioned thus
far, there are also other options. They are highly important as they allow you to make backup copies of the
machine configuration parameters, add new styles to personalize the look of the software and even define
new passwords and add other languages.