NARGESA MC650, Instruction Book, Page: 32 / 82

- 31 -
Now go to step 3 of the program. Push the movement button and the axis for which the height is defined
will move into position, creating the beginning of the bend for the piece. Make the bend by getting the ro-
llers to rotate left or right, as necessary. Continue with the remaining program steps until the piece is finis-
hed.
As soon as you finish, select step 1 of the program again and run it as you learned in order to remove the
bent piece. Remember that the machine will release the piece when the X and Y rollers are in the proper
position. Pay attention so it doesn
’ t fall.
5.3.6. Using Materials and Tools
As already explained in the “ General Data ” section, you can define additional information for a program.
This function makes it possible to replicate pieces always using the same conditions (profile type, material,
dimensions, position and roller direction...).
Even though the machine is supplied with a database including the most common materials and tools, each
customer has their own needs. This means you may need to create new materials or define new rollers to
adapt to all situations.
To do so, go to the general menu by pressing the icon that is always found at the bottom right - hand
of the screen.
Once in this menu, press the icon for access to the material management screen.