NARGESA MC650, Instruction Book, Page: 15 / 82

- 14 -
SECTION BENDING MACHINE MC650
Triangle figure
For voltage 230V
Triangle figure
For voltage 230V
The MC650 bending machine comes equipped with a 230V/ 400V 3Kw three - phase motor for the operation
of the rollers and a 230V/ 400V 0.75 Kw three - phase motor to regulate the hydraulic piston, both ready to
be connected to a 1 phase 230V power supply. The machine must be connected with the plug installed to a
compatible power supply that meets the requirements specified.
Figure 10. Engine connections
The hydraulic system motor is located in the inside of the cabinet, at the base of the machine.
The hydraulic group is located inside the cabinet, with the motor secured to the tank and the terminal box
located at the front of the machine.
Figure 11. Changing the hydraulic engine connections