NARGESA MC650, Instruction Book, Page: 26 / 82

- 25 -
5.3.4. Creating a New Program
All of the programs created are made up of steps. A program can have as many steps as are necessary to
generate the geometric shape required based on the piece curving.
The first step of a program is known as the “ loading step ” which is when the position of the bending rollers
allows the entrance of the material the machine will work with.
To create it, just place the X and Y rollers in a position that allows the profile or pipe to be bent to enter the
machine without colliding with the upper roller. You learned how to move both rollers in the section on the
manual operating mode. You follow the same procedure here.
So, once both rollers (X and Y) are positioned in the “ loading ” position, this step can be saved by pressing
the icon on the horizontal menu. Accept the confirmation message and continue.