EN
W415-2837 / 08.11.20
23
finishing
Cotter Pin
Bracket behind air
tube (not illustrated)
Notch Pin
4.4 secondary air tubes
1.
With the appliance door open or removed, insert the left side of the secondary air tube into the hole in the
left side
of the appliance.
2.
Insert the right side of the secondary air tube into the hole in the
right side
of the appliance. Ensure the
notch makes contact with the pin
(Fig. 4-5)
.
The back 3 secondary air tubes are factory-installed; therefore only the front secondary air tube (supplied
inside the firebox) will need to be installed.
note:
Fig. 4-5
Some parts
hidden
for clarity.
Fig. 4-6
Some parts
hidden
for clarity.
3.
Align the hole in the secondary air tube with the hole in the bracket inside the left side of the firebox, and
then insert a cotter pin (supplied)
(Fig. 4-6)
.
4.
Spread the cotter pin to retain the secondary air tube in place.
Before beginning installation, note the correct orientation of the secondary air tube. The side with the notch
should face to the right, while the side with 2 holes on the end should face to the left.
HOLES
(LEFT)
NOTCH
(RIGHT)
