EN
W415-4002 / 08.11.21
9
operatingyourappliance
1. Remove the safety barrier and glass door (see "safety barrier & door removal / installation" section).
2. Remove the 1 screw holding the bracket in place
(Fig.1)
. Lift the bracket up and out of the slots, lifting it
through the opening between the fi rebox and the appliance's outer shell
(Fig.2)
.
3. Insert optional receiver (F45 or F60). Secure the receiver using 2 screws (supplied).
4. Place the bracket and receiver back through the opening between the fi rebox and the appliance's outer shell.
Slide the bracket and receiver into and down the slots
(Fig.2inreverse)
.
5. Resecure the 1 screw to hold the bracket and receiver in place
(Fig.1)
.
Fig.1
Fig.2
Firebox
Outer Shell
2.3 bracketinstallationforoptionalF45/60receiver
