EN
W415-4002 / 08.11.21
17
maintenance
• Glass may be hot. Do not touch glass until cooled.
• If equipped with door latches that are part of a safety system, they must be properly engaged. Do not
operate the appliance with latches disengaged.
• Facing and/or fi nishing materials must not interfere with air fl ow through air openings, louvre openings,
operation of louvres, or doors/access for service. Observe all clearances when applying combustible
materials.
• Before door is removed, turn the appliance off and wait until appliance is cool to the touch. Doors are heavy
and fragile so handle with care.
6.3 safetybarrierandglassdoorremoval/installation
Abarrierdesignedtoreducetheriskofburnsfromthehotviewingglassisprovidedwiththe
applianceandmustbeinstalled.
1.
Before the glass door can be removed, the safety barrier must be removed. Lift the safety barrier from
the 4 tabs, tilt the top forward, and remove from the appliance
(Fig.1and2)
.
2.
Release the top left and right door latches, located at the top of the door
(Fig.3)
. Tilt forward and lift
from slots.
3.
Reverse these steps to re-install the safety barrier and glass door. Ensure safety barrier is installed
correctly.
Fig.1
Fig.2
note:
If applicable, the optional front must be removed to allow the door to be opened or closed.
Fig.3
