W415-2172 / B / 08.10.18
EN
12
installation
3.4 installing the appliance onto the wall
Due to the many different materials used on different walls, it is highly recom-
mended to consult your local builder before installing this appliance on the
wall.
A.
Select a location that is not prone to moisture and is located at
least 36" (91.4cm) away from combustible materials such as curtain
drapes, furniture, bedding, paper, etc.
B.
Have 2 people hold the appliance against the wall to determine the
final location.
C.
Place appliance face down on a soft, non abrasive surface. Remove
the bracket from the back of the appliance by removing the screws (see illustrations below).
D.
Mark out location, then mount the bracket(s) onto the wall using the supplied screws. This bracket MUST
have the hooks facing upward and be level.
E.
With the wall mounting bracket
installed, have 2 people lift the
appliance up and insert the 2
hooks on the bracket into the 2
slots on the back of the appliance.
F.
Check the appliance for stability
ensuring that the bracket will not
pull free from the wall.
HOOK
SCREWS
HOOK
It is strongly recommended that the mounting bracket be screwed into the wall studs where possible. If
the wall studs cannot be used, ensure that the supplied plastic anchors are used to affix the bracket to
the wall and the bracket is adequately secured.
note:
NEFL42/50FH-MT BRACKET ILLUSTRATED
NEFL60FH-MT BRACKET ILLUSTRATED
SIDE VIEW
BODY
MESH TRIM
21 5/8"
550mm