Note:
This kit must be installed or serviced by a qualifi ed installer, service agency or gas supplier.
These instructions are to be used in conjunction with the main installation instructions for the above
listed model.
WARNING: If the information in these instructions is not followed exactly, a fi re or explosion
may result causing property damage, personal injury or loss of life.
FOR ENGINE CONFIGURATIONS AND VENTING,
REFER TO MAIN INSTALLATION BOOKLET SUPPLIED WITH THE ENGINE.
FOR FRONT, FRET AND DOORS INSTALLATIONS,
REFER TO INSTALLATION BOOKLET SUPPLIED WITH EACH KIT.
The kit consists of a set of black sheet metal panels used to frame the 530 engine to accommodate the Front and the
Alhambra or Mesh Screen Doors. Combustible wall fi nish may contact the sides and top of the framing kit. The framing kit
may be installed fl ush or protruding from the wall fi nish but
not
recessed into the wall.
Freestyle Framing Kit components
Installation diagram
(See price list for choice of Fronts, Frets and Door Kits.)
Front
(required,
sold separately)
Standoffs
Insulation Pad
Fret
(required,
sold separately)
Doors
(optional, sold separately)
Freestyle Framing Kit
(includes ZC components
shown here)
530 Engine
(required, sold
separately)
Top
Bracket
Heat
Duct
Bottom Panel
Frame
Mounting
Brackets
(4)
RH Side
Bracket
LH Side
Bracket
Back Support
Bracket
SFFK01
STONEFIRE FREESTYLE FRAMING KIT
INSTALLATION INSTRUCTIONS
CSA approved for use
only
with
Valor Model 530 Heater
400101-04
TM
