
page
41
www.naoclean.com
A/S manual
- When the device in not used for a long time, take apart the suction hose and high pressure hose, and letout the residual water inside the pump as well.
- When preserving the device, pay attention to avoid the corrosion and damage. When keeping in chilly weather, consider take some anti-freezing
measures like adding some Deicing fluid to protect the parts in the pump.
1. When the consumption of saline solution is significantly increasing abnormally.
2. If the display number decreases during its normal operating process and ‘Er (error)’ message keeps showing up.
3. When the smell of disinfectant significantly decrease.
※ A life time (approx. 10,000 hours) of the electrode may vary depending on water quality.
※ Request a repair in case of the above situation after a prolonged use.
Electrodes replacement period
(DES-10K)
4. Replacement period >
Electrodes replacement
/
Change the pump oil
Change the Pump oil
(DES-WA100E)
The new washer, after using for about 50 hours, the crankcase of it should be cleaned as following:
1. Place the Oil tray in front of the Oil drain screw (①).
2. Unscrew the Oil drain screw (①) and Oil adding plug (②) to release the residual oil in the crankcase
and then tighten the screw (①) back with a screwdriver.
3. Add clean kerosene inside the Oil adding plug (②), but do not let the kerosene excess the red sign of
the Oil level sight glass (③).
4. Please run the pump with tickover for 10 to 15 SECONDS; turn off the device and letout the kerosene.
5. After draining the kerosene, please fasten the Oil drain screw (①), and fill Oil adding plug (②) with the
new pump oil (Be careful of overflowing), and then close the plug (②).
6. After finishing it, remove the Oil tray.
- The level of the oil must be checked periodically.
- The most important is that the oil must be changed after the first 50 hours of work and successively
every 100 hours.
- In any case we suggest change the oil at least once a year.
- Oil type : 15W-40 or equivalent motor oil.
- Oil capacity: 350ml ± 5ml
Oil adding plug
Oil drain screw
Oil level sight glass
1
3
2
Summary of Contents for DES-10K
Page 2: ......