page
32
A/S manual
2. How to install >
Installation / Pipe connection /
Assembling method of Washer
/ Example
Assembling method of the Washer
(DES-WA100E)
Assemble the High pressure hose to gun
Connect the High pressure hose to the Water
inlet of the gun, and tighten securely.
Assemble the hose to connector of
the Storage tank (Refer to the picture)
Connect the Hose to connector of the Storage
tank entirely. And tighten the hose with
tightening band. (Be careful it is difficult to
disassemble after tightening the band.)
Assemble the Quick-changing plug
Move the snap ring and plug the Quick-changing plug rapidly and
release the snap ring. Fix the High pressure hose on the pump.
Assemble each parts of the gun
Nozzle:
Push the snap ring to the back and plug the nozzle.
Lance:
To assemble the spray lance to the gun handle, turn in
a counter-clockwise direction.
Make sure the joint is tightly and firmly connected, otherwise
the pump will not suck the water as it suck the air instead.
Summary of Contents for DES-10K
Page 2: ......