page
16
User guide
If the nozzle becomes clogged with foreign materials, the pump pressure will pulsate.
Clean the nozzle and other parts immediately with the following instructions:
1) Shut off the Washer and close the water supply.
2) Pull the trigger to release any remaining pressure.
3) Disconnect the spray lance from the gun and the high pressure nozzle from the
spray lance. (Refer to the picture)
5) Shake the dust off inside the spray lance, nozzle and the gun, and wash out
inside the each parts with tap water.
6) Reassemble the nozzle to the spray lance.
7) Reconnect spray lance to the gun handle.
8) Start the device and check if something is wrong.
To disconnect the spray lance from
the gun, turn in a clockwise direction.
Cleaning the gun
3. Using the device >
How to operate /
How to clean & Maintenance
/ Applications
After using the Washer
You have to rinse the saline solution inside the Washer by
washing out with tap water. It prevents the device from cor-
roding and extends the life.
1. Remove inside the Storage tank, and pour a proper
amount of tap water.
2. Assemble the Storage tank’s hose with the Pump inlet.
3. Select the selector to [Washer] on the Storage tank,
and close the Drain valve of tank.
4. Turn on the power of the Washer and pull the trigger to
drain off the water from the tank.
※Keep the device in dry and clean environment.
Air intake should not be blocked by impurities.
To disconnect the nozzle,
push the joint to the back.
Summary of Contents for DES-10K
Page 2: ......