page
12
User guide
3. Using the device >
How to operate
/ How to clean & Maintenance / Applications
1. Fill the salt tank with 5kg salt. And, assemble the Storage tank’s hose with
the Pump inlet (①).
2. You must select the selector (②) to [Washer]. (If the selector is selected to
[Disinfectant], water may flow out from the Storage tank.)
3. Check the Drain valve (③) is closed.
4. After that, turn on the power of Disinfectant generator.
5. Select the option of the ‘Utensils’ on the right side of the device (④).
6. Press the ‘Start/Stop’ button to create the disinfectant. Before turning on the
power of Washer, you must pull the trigger to release the remaining pressure.
7. And then, press the ON button (⑤), pulling the trigger.
※When the motor is operating normally, please wait until the air in the pump is released
by pulling the trigger, and then you can use the Washer.
※When the motor is not operated normally, (If motor makes strange sound.) please turn
on and off 2~3 times while pulling the trigger continuously.
8. After that, hold the gun with two hands, aim it toward your target area and
shoot.
※When using, the distance between the nozzle and the surface of the object is
usually less than 1 meter.
9. After using it, turn off the power of Washer and Disinfectant generator, and
please release the remaining pressure by pulling the trigger.
How to use High pressure washer with disinfectant
(DES-WA100E)
③
⑤
④
①
②
[Disinfectant] ◀
▶ [Washer]
Summary of Contents for DES-10K
Page 2: ......