page
26
A/S manual
Hose reel
1. Drill four holes and screw each anchor bolts on the position where the
hose reel will be installed.
(Clearance between the holes: width 150mm x length 120mm)
2. Hang the rear panel on the wall where the anchor bolts are stuck and
tighten the nuts.
3. Place the hose reel at the U-shaped bracket and then attach the
bracket hole with the fixing pin.
4. Lastly, anchor the fixing pin that the hose reel may not to be fallen out.
※Hose reel image was omitted for easy explanation.
2
3
4
150mm
1
120mm
2. How to install >
Installation
/ Pipe connection / Assembling method of Washer / Example
Main unit
1. Drill two holes and screw each anchor bolts on the position where the
main unit will be installed. (Clearance between the holes 395mm)
2. Hang the main unit on the anchor bolts and tighten the nuts.
How to hang the device on the wall
395mm
1
2
Salt tank
1. Drill two holes and screw each anchor bolts on the position where the
salt tank will be installed. (Clearance between the holes 220.5mm)
2. Hang the case of salt tank and tighten the nuts.
3. Please check the case is anchored firmly and then put the inside tank
in the case.
220.5mm
1
2
3
Summary of Contents for DES-10K
Page 2: ......