page
25
www.naoclean.com
A/S manual
2. How to install >
Installation
/ Pipe connection / Assembling method of Washer / Example
Caution before installation of the
Disinfectant generator
(DES-10K)
1. Do not install this device in
the area where ventilation does
not function properly, or in oily,
smoky, humid, dusty, and water
splashing places.
2. To avoid the danger of fall-
ing,
keep the device on the
flat walls
and maintain level of
the device.
3. Install the device in a place
with surrounding temperature
of 5~40℃ and humidity must
be less than 95% RH.
It must
be protected from a freezing
trouble.
4. You have to use an ap-
proved single socket. Do not
use a multi-socket.
(If you use a multi-socket, it
may be overheated.)
※ If a grounded socket is not available, make sure to connect the ground wire to a Grounding pole of the floor or Grounding connector. (Metal pipes)
※ Do not ground the device to a gas pipe or an antenna. (Refer to the page 30 > How to make a ground connection)
If the surrounding temperature dropped below zero degrees,
please stop using the device.
If the device is not used for a long time,
press the Cleaning button to clean inside the device (automatically) and
completely drain by opening the Drain valve at the bottom of the device. (Refer to the page 15)
Summary of Contents for DES-10K
Page 2: ......