page
27
www.naoclean.com
A/S manual
2. How to install >
Installation
/ Pipe connection / Assembling method of Washer / Example
Storage tank
1. Drill two holes and screw each Concrete screw bolts on the position
where the tank will be installed. (Clearance between the holes 362mm)
2. Hang the case of Storage tank.
3. Please check the case is bolted firmly and then put the inside tank
in the case.
step 1. Connect ①.
step 2. Connect ② to the Power wire of Main unit.
step 3. Connect ③ to the Solenoid valve.
step 4. Connect the two hose into ④ and ⑤.
(Please distinguish color of each hoses label.)
Please wash out in the Salt tank. (Refer to the page 15)
If any debris goes into the pump or Check valve, it may occur the
damage of parts.
How to connect the wire of salt tank
Supply of water
Power wire
Water level controller
Solenoid valve
Solenoid valve wire
Water supply hose
Saline supply hose
Drain valve
Outlet
Supply of
saline solution
How to hang the device on the wall
2
3
4
362mm
1
back side
Summary of Contents for DES-10K
Page 2: ......