manualshive.com logo in svg

NanoString Technologies nCounter, User Manual

Share
Download
NanoString Technologies nCounter User Manual Download Page 33

  

2017-07  MAN-C0034-06

   

|

   

33

NanoString Technologies

®

 

USER MANUAL

The following information is available:

1.   Sample ID 

– The Sample ID entered manually or via a barcode scanner when creating the Run Set

2.   Run Set ID

 – The Run Set ID entered when creating the Run Set in the web application

3.   Status 

– The condition or state that the sample is currently in. The following are possible statuses for a sample:

• 

SampleRegistered

 – Sample Registered (Sample is defined; has not started processing yet)

• 

PostHybProcessing

 – Prep Station Processing (Run Set is currently processing on the Prep Station)

• 

PostHybComplete

 – Prep Station Completed (Run Set has completed on the Prep Station)

• 

PostHybAbort

 – Prep Station Abort (manual abort on the Prep Station) 

• 

PostHybError

 – Prep Station Error (an error occurred during processing on the Prep Station)

• 

ScanProcessing

 – DA Scan Processing (currently processing on the Digital Analyzer)

• 

ScanError

 – DA Scan Error (an error occurred during processing on the Digital Analyzer) 

• 

ScanAbort

 – DA Scan Abort (manual abort on the Digital Analyzer)

• 

ReportPending

 – Report Pending (Scanning complete, but waiting for the algorithm to complete)

• 

ReportProcessing

 – Report Processing (Algorithm is running but the report has not been produced yet)

• 

ReportComplete

 – Report Complete (Digital Analyzer has finished scanning and reports are available for download from the 

Reports page)

• 

ReportError

 – Report Failed (All processing for the run set is complete but a report was not generated due to an error in the 

algorithm)

• 

ReportCompleteWithError

 – Report Complete with Error (All processing for the run set is complete, and a report generated, but 

the assay failed)

4.   Last Update

 – The date that the sample last changed status

5.   Created By

 – The User ID that created the Run Set using the web application

6.   Lane 

– The lane where the sample resides on the Cartridge

7. Memo

 (optional) – Notes about the sample entered in the Memo field of the Run Set form

8.  Prep Station

 – Name of the Prep Station on which the sample was processed, useful if more than one Prep Station is connected to 

the Digital Analyzer

Summary of Contents for nCounter








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands