manualshive.com logo in svg

NanoString Technologies nCounter, User Manual

Share
Download
NanoString Technologies nCounter User Manual Download Page 31

  

2017-07  MAN-C0034-06

   

|

   

31

NanoString Technologies

®

 

USER MANUAL

The following information is available:

1.   Run Set ID 

– The Run Set ID entered when the Run Set was created

2.   Status 

– The current condition or state of the Run Set. Status possibilities include:

• 

BatchRegistered 

– Run Set Registered (Run Set is defined but has not started processing yet)

• 

PostHybProcessing

 – Prep Station Processing (Run Set is currently processing on the Prep Station)

• 

PostHybComplete

 – Prep Station Completed (Run Set has completed on the Prep Station)

• 

PostHybAbort

 – Prep Station Abort (manual abort on the Prep Station) 

• 

PostHybError

 – Prep Station Error (an error occurred during processing on the Prep Station)

• 

ScanProcessing

 – DA Scan Processing (currently processing on the Digital Analyzer)

• 

ScanError

 – DA Scan Error (an error occurred during processing on the Digital Analyzer) 

• 

ScanAbort

 – DA Scan Abort (manual abort on the Digital Analyzer)

• 

BatchComplete

 – Batch Complete (Run Set has completed processing)

• 

ReportPending

 – Report Pending (scanning complete, but waiting for the algorithm to complete)

• 

ReportProcessing

 – Report Processing (algorithm is running but the report has not been produced yet)

• 

ReportComplete

 – Report Complete (Digital Analyzer has finished scanning and reports are available for download from the 

Reports page)

• 

ReportError

 – Report Failed (all processing for the Run Set is complete but a report was not generated due to an error in the 

algorithm)

• 

ReportCompleteWithError

 – Report Complete with Error (all processing for the Run Set is complete, and a report generated, but 

the assay failed)

3.   Created 

– The date the Run Set was initially created using the web application

4.   Created By

 – The User ID that created the Run Set using the web application

5.   Initiated By

 – The User ID that started processing the Run Set on the Prep Station

To view more details of the individual samples for a Run Set of interest, click on the hyperlink for that Run Set (

FIGURE 4.16

). The application 

will navigate to the ‘Samples’ page and display sample information for the selected Run Set.

Summary of Contents for nCounter








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands