manualshive.com logo in svg

NanoString Technologies nCounter, User Manual

Share
Download
NanoString Technologies nCounter User Manual Download Page 13

 

 017-07  MAN-C0034-06

   

|

   

13

NanoString Technologies

®

 

USER MANUAL

3

  

Selecting the Instrument Mode

Users who have the FLEX configuration are able to run their instruments in either Life Sciences or Diagnostics (Dx) application modes. The 
FLEX configuration must be enabled by NanoString Support. 

NOTE: 

If the FLEX configuration has not been enabled, the instructions provided in this chapter will not apply; only the 

Diagnostics application mode will be available. Proceed to Chapter 4.

All NanoString IVD assays must be performed using the Diagnostics mode on these instruments. In Diagnostics mode, procedures and 
controls are in place to restrict access to data and some features to authorized users only. For all other applications, individuals using 
nCounter CodeSets or nCounter Elements should choose the Life Sciences mode and refer to the 

nCounter Analysis System User Manual 

for 

further instruction.

Summary of Contents for nCounter








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands