N&W Global Vending Colibri UL 120V, Use And Installation Manual

Page: 7 / 52

3
© by N&W GLOBAL VENDING SpA 02-2007 266 00
POSITIONING THE VENDING MACHINE
The vending machine is not suitable for outdoor installa-
tion. It must be positioned in a dry room where the tempera-
ture remains between 2"C and 32"C, and not where water
jets are used for cleaning (e.g. in large kitchens, etc.).
The machine should be placed close to a wall, so that the
back panel is at a minimum distance of 4 cm from it and
correct ventilation may be ensured. The machine must
never be covered with cloth or the like.
The machine should be positioned with a maximum incli-
nation of 2".
If necessary provide proper levelling by way of the adjust-
able feet included.
Important notice!!
Access to the machine interior for maintenance and/or
repairs is via the back panel.
Therefore the machine is designed to be rotated, thus
allowing removal of the back panel.
Installation on a cabinet
The machine can be installed on a table or on any other
suitable stand.
If possible, it is advisable to use the special cabinet, which
can house the liquid waste tray, the water supply kit, the
payment system and, in the case of very hard water, the
softener unit.
WARNING FOR INSTALLATION
The machine installation and the following mainte-
nance operations should be carried out by qualified
personnel only, who are trained in the correct use of
the machine according to the standards in force.
The machine is sold without payment system, therefore
the installer of such system has sole responsibility for any
damage to the machine or to things and persons caused by
faulty installation.
The integrity of the machine and compliance with the
standards of the relevant systems must be checked at
least once a year by qualified personnel.
All packing materials shall be disposed of in a manner
which is safe for the environment.
PRECAUTIONS IN USING THE MACHINE
The following precautions will assist in protecting the
environment:
- use biodegradable products only to clean the machine;
- adequately dispose of all containers of the products
used for loading and cleaning the machine;
- switch the machine off during periods of inactivity, thus
achieving considerable energy savings.
WARNING FOR SCRAPPING
The symbol indicates that the machine may not be
disposed of as ordinary waste; it must be disposed of in
accordance with the provisions of the European directive
2002/96/CE (Waste Electrical and Electronic Equipment -
WEEE) and of any resulting national laws, for preventing
any possible negative consequences to the environment
and to health.
For correct disposal of the machine, contact the dealer
from whom you have purchased the machine or our after-
sales service.
TECHNICAL SPECIFICATIONS
Height mm 650
Height with container mm 760
Width mm 410
Depth mm 490
Overall depth with door open mm 830
Height of base cabinet (optional) mm 820
Weight Kg 38
Power supply voltage V~ 120
Power supply frequency Hz 60
Installed power W 1300
Fig. 2