N&W Global Vending Canto Plus Instant, Installation Operation & Maintenance

Page: 22 / 68

© by N&W GLOBAL VENDING S.p.A.
16
07 - 2010 3375 - 01
oPEratIoN
c
omparTmENT covEr
the machine is complete with a cup shift arm that can
keep the dispensing nozzles very close to the drink, thus
improving its quality and reducing to a minimum the pos-
sibility of making the dispensing area dirty. the system is
also complete with a shutter closing the cup passage to
provide for separation from the outside.
For instant drinks you can set up a wait time (from zero
to 2000 c/s) after the end of delivery, at the expiry of
which the shutter will close. the end-of-delivery sound
signal is supplied.
a microswitch signals the machine the position of the
cup shift arm.
c
up sENsor
some models are equipped with a cup sensor intended
to detect the presence of any object that may be placed
between the reflex reflector and the sensor itself.
the sensor is provided with two lEDs intended to signal
the state:
the green lED on indicates that the sensor is supplied -
the orange lED on indicates that sensor is detecting -
an object
For a correct operation it is necessary to keep the emit-
ter and the reflex reflector in front of it clean.
Fig. 19
Dispensing compartment 1-
Extraction knob 2-
Support of dispensing tubes 3-
Cup shift arm 4-
Mobile drink dispensing cover 5-
Ratio-motor operating levers 6-
Mobile cup dispensing cover 7-
Nozzle fastening knurl 8-
Drain tube 9-
Fig. 20
Cup sensor 1-
Emitter 2-
Reflex reflector 3-