N&W Global Vending Canto Plus Instant, Installation Operation & Maintenance

Page: 18 / 68

© by N&W GLOBAL VENDING S.p.A.
12
07 - 2010 3375 - 01
labEl INsErtIoN
to insert the product labels, remove the metal sheet
pushbutton panel protection by loosening the fastening
screws.
Disassemble the selection keyboard after having
removed the three fastening screws by acting on fixing
clips (see fig. 14).
Insert the labels into the slots alternatively opening on
the right and left side.
some buttons may not be used according to the models
(see the selection dose table).
the self-adhesive labels also supplied shall be applied
to the product containers according to the arrangement
(see the selection dose table).
N
umEric sElEcTioN moDEls
to insert the selection labels, disassemble the left side
panel from the door by removing the 5 screws complete-
ly and by extracting the clips from the seats (see fig. 15).
Extract the menu panel and insert the labels in the cor-
responding slots.
some positions may not be used according to the mod-
els (see the selection dose table).
the self-adhesive labels also supplied shall be applied
to the product containers according to the arrangement
(see the selection dose table).
Reassemble everything in the reverse order.
Fig. 14
Fastening screws 1-
Fixing clips 2-
Selection keyboard 3-
Product labels 4-
Fig. 15
Fastening screws 1-
Door side panel 2-
Menu panel 3-
Label pockets 4-
Selection labels 5-