N&W Global Vending Canto LB 3600, Installation Operation & Maintenance

Page: 42 / 72

© by N&W GLOBAL VENDING S. p. A.
36
09 2010 H 83127 00
m
acHiNe serial NumBer
Use this function to change the 8-digit numeric code in-
tended to identify the vending machine (default set to 0).
p
rogrammiNg THe operaTor coDe
When the display is set to the “operator code” function,
you can change the 6-digit numeric code identifying
groups of machines (default to 0).
l
ocaTioN coDe
When the display is set to the “location code” function,
you can change the 8-digit numeric code identifying the
place of installation of the machine (default to 0).
i
NsTallaTioN DaTe
Use this function to store the current system date as the
installation date.
the date is printed at the time of rolling out statistics.
p
rogrammiNg THe macHiNe coDe
When the display is set to the “Machine code” function,
you can change the 8-digit numeric code identifying the
machine (default to 0).
a
spiraTor maNagemeNT
Use this function to set the continuous operation of the
suction fan wheel of instant products:
- on fan wheel always on;
- oFF fan wheel on only during the dispensing cycle and
for the next 30 seconds.
tEst
test
test DIspensInG
specIal FUnctIons
aUtotest
tecHnIcIan> X.X
T
esT DispeNsiNg
Function used to dispense the following for every single
selection when the door is open and without inserting
the amount required:
complete selection -
water only -
powder only -
no accessories (cup, sugar and stirrer) -
accessories only -