Nana Wall Systems, Inc.
100 Meadowcreek Drive #250
Corte Madera, CA 94925
800 873 5673
415 383 3148
Fax 415 383 0312
[email protected]
nanawall.com
©2022 Nana Wall Systems, Inc.
PAGE 4 OF 4
• Variations in wood grain or color; Warp within the allowable warp tolerance for wood panels per ANSI/WDMA I.S.
6A-01; Warpage on wood panels caused by leaving panels in the open position exposed to the elements or not
engaging the locking points properly when in the closed position; Resin or sap bleeding from wood panels.
• Panel shrinkage or expansion caused by change in weather; Expansion or bowing of aluminum units caused by
exposure to sunlight or caused by temperature difference between interior and exterior panel surfaces.
• Acts of God, falling objects, fire, accidents, external forces, or other conditions beyond NanaWall’s control.
• Gas fill or retention levels in insulated glass units.
• Field testing of Product; Performance of the Product in conformance to any published NanaWall testing results (e.g.
air infiltration, water infiltration, structural loading). Published test results measure the laboratory performance of a
single sample of the product of a certain size and configuration. Performance during testing may vary depending
upon handling, installation, use, maintenance, and testing.
• Products or components not supplied by NanaWall; Products that have not been paid for in full; Products ordered in
larger sizes or special configurations beyond NanaWall’s published specifications. Product with glass that is heavier
than NanaWall specifications; Product that has been modified or altered in any manner.
NANAWALL LIMITED WARRANTY
