NAMCO Prop cycle, Operator'S Manual

Page: 40 / 59

Page 40
6) Remove the eight hex head bolts (M10x25) (with spring and flat washers)
and remove the joint base.
NOTE: The joint base weighs approx. 20kg so be careful when installing
or removing it.
7) Remove the four hex nuts (M12), spring washers (M12) and flat washers
(M12) and remove the joint spacer.
8) Remove the four hex head screws (M10x35) (with flat and spring washers)
and remove the cross link.
NOTE: The narrow pillow-type unit rotates. When attaching it to the joint base,
make sure the installation holes are facing up as shown in the figure
above.