NAMCO Prop cycle, Operator'S Manual

Page: 19 / 59

Page 19
e. When the start button has been pressed, the following screen is
displayed.
f. If “OK” is displayed the pedals are correct.
If “NG” is displayed there has been a problem in reading the pedal
rotation. Press start and repeat steps c) and d) again.
If “NG” is still displayed after repeating the test, there is the
possibility that the sensor board or sensor sticker is faulty.
g. Press the start button while pulling back on the handle bars, to return
to the “I/O Test” menu.
5-3-3-3 Fan Motor Test
a. Select “MOTOR” on the menu screen and press the start button. The
following screen is displayed.
b. When the start button is pressed once, ‘OFF’ changes to ‘ON’ and
the fan motor starts and blows air from the front of the cabinet. When
the start button is pressed again, ‘ON’ changes to ‘OFF’ and the fan
motor stops.
c. Select “EXIT” and press the start button to return to the “I/O Test”
screen.
I/O TEST
DIP 12345678
SWITCH
PEDAL
PEDAL C5CF
E N D
O K
RETRY : PRESS START
TO EXIT : PUSH START AND HANDLEBARS UP
I/O TEST
DIP 12345678
SWITCH
PEDAL
MOTOR
FAN MOTOR OFF
EXIT
START : ENTER UP/DOWN : CHOOSE