NAMCO Prop cycle, Operator'S Manual

Page: 28 / 59

Page 28
7) Move the flywheel back to disengage it from the cycle frame.
Note: When disengaging the flywheel, the link unit will come off the
shoulder bolt, so hold it by hand.
8) Lift the flywheel up a little and remove the drive belt from the flywheel
pulley.
9) Remove the flywheel together with the entire link unit by withdrawing the
assembly from the right hand side.
10) Re-assembly in reverse order.
Note: When re-assembling, fit the flange nuts and nylon nuts finger tight
until the drive belt tension has been adjusted.
(see section 7-2-1)