NAMCO Prop cycle, Operator'S Manual

Page: 37 / 59

Page 37
7-11 Replacing the Pedals
1) Remove the security screw (M5x12) and remove the pedal cover.
2) Loosen the nylon nut (M6) on the crank pin ensuring that no threads are
protruding through the nut. (If any thread is protruding , the thread may be
damaged in the following step).
3) Turn the pedal so that the nylon nut is at the top. Holding the pedal firmly
tap the nut with a hammer to release the crank pin. Once the crank pin
has been released the nylon nut can be removed and the crank pin
withdrawn.